TM  10-8400-203-23 1-7.  INSPECTION/CLASSIFICATION  PROCEDURES  -  Continued Band, Helmet, canvas LIN  B24265 1. Inspection Procedure: Inspect for rips, tears, and frays. 2.   Classification: Code  A.  New  and  unused  items  possessing  original  appearance  and  serviceability. Code B. Used items not suitable for Code A but are undamaged and suitable for issue as is. Code F. Item does not qualify for Code F. No repair is authorized. Code H. Any item not suitable for issue as is will be scrapped. Belt, Individual Equipment (Pistol Belt) LIN B59567 1. Inspection Procedure: Inspect item for damaged or missing parts. Check for damage to metal parts. Check webbing for fraying or discoloration. 2.   Classification: Code A. Code  B. Code F. Code  H. New item with no evidence of use, discoloration, or weakened material. No missing parts. Used items that are not suitable for Code A but are complete and suitable for issue as is with no rips, tears, holes, or frayed edges. Unserviceable items that can be repaired by replacing missing or damaged parts. Some fraying is acceptable as long as it can be repaired by trimming without distorting or changing the original config- uration of the belt. Unserviceable items that are obviously scrap, or cannot meet the criteria for Code F. Binding, Ski; Chapter 9 LIN 1. Inspection Procedure: Inspect bindings for frays, cracks, chips, burns, Ioose fasteners, malfunctioning springs and pivot points. Inspect for mildew, rot or cracks. 2. Classification: Code  A.  New  and  unused  item  possessing  original  appearance  and  serviceability. Code B. Items that are not suitable for Code A but are undamaged, functional, clean, and are suitable for is- sue as is. Code F. Unserviceable  items  that  can  be  repaired  by  replacing  missing  screws  or  damaged  parts.  Malfunc- tioning release mechanisms, springs, and pivot points are cause for salvage. Code H. Unserviceable items that are obviously scrap or cannot meet the criteria for Code F. Change 6    1-7