TM 10-8400-201-23 2-6.  WORKMANSHIP All  work  shall  be  accomplished  by  personnel  skilled  in  the  particular  trade  applicable  to  their  duties.    Darning  shall  be neatly  accomplished  and  patches  shall  be  of  the  proper  size  and  firmly  stitched  to  the  garments.    Stitching  and reseaming  shall  be  secure  and  loose  ends  shall  be  turned  and  removed.    Buttons,  buckles,  and  belt  loops  shall  be securely  and  properly  attached  and  function  as  intended.    The  finished  items  shall  be  complete  and  well  repaired, thoroughly cleaned, and free from all defects which may affect serviceability or general appearances. 2-7.  INSPECTION The inspection or quality control unit is responsible for determining compliance with repair instructions and requirements for  classification.    In  process  inspection  will  be  performed  for  quality  of  workmanship  and  correct  application  of  repair procedures.  The completed item will be inspected for serviceable condition and appearance to insure against return of a sub-standard product to supply channels. 2-12