TM 10-3510-208-12
Section XXII. WASHER-EXTRACTOR CONTROLS AND INSTRUMENTS AND
CONTROL BOX COMPONENTS
(a) Position the signal light in place and
4-67. Washer-Extractor Controls and Instruments
secure with locking nut.
and Control Box Components
(b) Install bulb by depressing in socket and
a. Panel Light
turning clockwise.
(c) Install shield.
following instructions to remove the formatrol
(d) Reconnect leads to the signal light.
panel light.
d. Auto-Manual Switch.
(a) Tag and disconnect electrical leads from
the formatrol panel light.
the following instructions to remove the auto-
(b) Remove bulb by depressing and turning
manual switch.
counterclockwise.
(a) Tag and disconnect leads from the auto-
(c) Remove the nut and washer securing the
manual switch.
lamp socket to the lamp bracket.
(b) Remove the locking nut securing the
(d) Remove the lamp socket.
auto-manual switch to the control box.
(2) Installation.
(c) Remove the auto-manual switch.
(a) Position the lamp socket in place on the
(2) Installation.
lamp bracket.
(a) Position the auto-manual switch in place
(b) Secure lamp socket to the lamp bracket
and secure with locking nut.
with washer and nut.
(b) Reconnect leads to the auto-manual
(c) Install bulb in socket by depressing and
switch.
turning clockwise.
e. Wash and Pre-Extract Switch.
(d) Reconnect leads to the formatrol panel
light.
the following instructions to remove the wash and
b. Washer Reversing Switch.
pre-extract switch.
(a) Tag and disconnect leads from the wash
the following instructions to remove the washer
and pm-extract switch.
reversing switch.
(b) Remove the locking nut securing the
(a) Tag and disconnect leads from the
wash and pre-extract switch to the control box.
washer reversing switch.
(c) Remove the wash and pre-extract
(b) Remove the screws and washers that
switch.
secure the washer reversing switch on the
(2) Installation.
mounting plate.
(a) Position the wash and pre-extract switch
(c) Remove the washer reversing switch.
in place on the control box and secure with locking
(2) Installation.
nut.
(a) Position the washer reversing switch in
(b) Reconnect leads.
place on the mounting plate.
f. Brake-Drain Switch.
(b) Secure with washers and screws.
(c) Reconnect leads to the washer reversing
and the following instructions to remove the brake-
switch.
drain switch.
c. Signal Light.
(a) Tag and disconnect leads from the
blake-drain switch,
the following instructions to remove the signal
(b) Remove the locking nut securing the
light.
brake-drain switch to the control box.
(a) Tag and disconnect leads from the
(c) Remove the brake-drain switch.
signal light.
(2) Installation.
(b) Remove the shield from the signal light.
(a) Position the brake-drain switch in place
(c) Remove bulb from signal light socket by
and secure with locking nut.
depressing and turning counterclockwise.
(b) Reconnect leads to the brake-drain
(d) Remove locking nut securing the signal
switch.
light to the control box.
g. Extract Switch.
(e) Remove the signal light.
(2) Installation.
4-126