LO 10-3530-250-12-3
LUBRICATION ORDER
6 AUGUST 1985
CLOTHING REPAIR SHOP, TRAILER MOUNTED
MODEL: CRS
BUTTON SEWING MACHINE
CHANDLER MODEL NO. 600
Reference TM10-3530-205-14 and C9100-IL
Intervals (on-condition or hard time) and the related
ing solvent (SD), type II or equivalent. Dry before
task-hour times are based on normal operation. The
lubricating. The lowest level of maintenance to lubricate
task-hour time specified is the time you need to do all the
a point is indicated by one of the following:
services prescribed for a particular interval. On-condition
(OC) oil sample intervals shall be applied unless
(C)
Operator/Crew or(O) Organizational
changed by Army Oil Analysis Program
(AOAP)
Maintenance.
Laboratory. Change the hard time interval if your
lubricants are contaminated or if you are operating the
You can help improve this manual. If you find any
equipment under adverse operating conditions including
mistakes or if you know of a way to improve procedures,
longer-than-usual operating hours.
The hard time
please let us
know. Mail yourletter or DA Form
interval may be extended during periods of low activity. If
2028 (Recommended Changes to Publications and
extended adequate preservation precautions must be
Blank Forms) direct to: Commander, US Army Troop
taken. Hard time intervals will be applied in the event
Support Command, ATTN: AMSTR-MPS,
4300
AOAP laboratory support is not available. Clean all
Goodfellow Blvd, St. Louis, MO 63120-1798. A reply
lubrication points with dry clean-
will be furnished to you.
Card 1 of 2