TM  55-1520-240-23-9 11-14.1 REPAIR  FINISH OF BELLCRANKS  AND CONNECTING LINKS 11-14.1 INITIAL  SETUP Applicable Configurations: With    26 Tools: Airframe  Repairer’s  Tool Kit,  NSN  5180-00-323-4876 Materials: Brush  (E86) Aliphatic  Naphtha  (E245) Dry  Cleaning  Solvent  (E162) Abrasive  Paper  (E9) Toluene  (E422) Cloths  (E120) Epoxy  Primer  (E292.1) Protective  Gloves  (E184.1) ALBI  107A  Base  Coating  (E135.3) ALBI  144  Top  Coating  (E135.4) Alodine  Powder  (E65) Nitric  Acid  (E22) Marking  Ink  (E205) Personnel  Required: Aircraft  Structural  Repairer Inspector References: TM  55-1500-345-23 Equipment  Condition: Off  Helicopter  Task General  Safety  Instructions: ALBI  107A  base  coating  (E135.3)  and ALBI  144  top  coating  (E135.4)  are combustable  and  toxic.   They  can irritate  skin  and  cause  burns.   Use only  with  adequate  ventilation,  away from  open  flame.  In  case  of  contact, immediately  flush  skin  or  eyes  with water  for  at  least  15  minutes.  Get medical  attention  for  eyes. Dry  cleaning  solvent  (E162)   is combustable  and  toxic.  Avoid  contact with  skin,  eyes,  or  clothing.   Use only  with  adequate  ventilation,  away from  open  flame.  In  case  of  contact, immediately  flush  skin  or  eyes  with water  for  at  least  15  minutes.  Get medical  attention  for  eyes. Toluene  (E422)  and  epoxy  primer (E292.1)  are  flammable  and  toxic. They can irritate skin  and cause  burns. Use  only  with  adequate  ventilation, away  from  open  flame.  Avoid  contact with  skin,  eyes,  or  clothing.  In  case of  contact,  immediately  flush  skin or  eyes  with  water  for  at  least  15 minutes.   Get  medical  attention  for eyes. 11-55