TM  55-1520-240-23-9 11-13 REPAIR  FINISH OF BELLCRANK  AND  ARMS (Continued) 11-13 d. Slowly  add  3 ounces  of  alodine  1200  (E65) and  1/2  fluid  ounce  of  nitric  acid  (E22) to  1  gallon  of  water.   Stir  until  powder  is dissolved.  Use  a  stainless  steel,  aluminum, vinyl,  polyethylene, or  rubber  lined  container. Wear  gloves  (E184.1). e. Apply  solution  from  step  d  to  damaged surface  until  coating  is  formed.   Coating should  form  in  1 to  5 minutes. f. Rinse  surface.  Use  cloth  (E120)  moist  with water.   Blot  dry.   Do  not  rub. g. Check  coated  surface.   Complete  surface must be  coated  and  color  range  from  gold  to brown.   Allow  to  dry. h. Remove  any  powder  from  surface.  Use  cloth (E120). i. Apply  two  coats  of  epoxy  primer  (E292.1). Wear  gloves (E184.1).   Allow  to  air  dry  30 minutes  between  coats. FOLLOW-ON MAINTENANCE: As  Required END  OF  TASK 11-52