TM  55-1520-240-23-9 11-8 INSPECT BELLCRANK AND  CONNECTING LINK  BEARINGS  (REMOVED) (Continued) 11-8 DRY  TYPE  BEARINGS 2. Check  dry type  rod  end  bearings  as follows: a. Check visually for frayed  fabric between  inner and  outer races.  If fraying  extends more  than 1/8 inch inside  races,  replace  bearing. b. Teflon  sticking  to  spherical  ball is  acceptable. c. Move  bearing  radially.   If  looseness  is  more than  0.007 inch,  replace  bearing. d. Move  bearing  axially.   If  looseness  is more than  0.010 inch,  replace  bearing. e. Rotate  bearing.   If  bearing  is  hard  to  turn, replace  bearing. NOTE High  rotational  forces  cause  high starting  forces  within  the  flight control system. FOLLOW-ON MAINTENANCE: As  Required END  OF  TASK 11-41