TM  55-1520-240-23-9 11-6.3 ISOLATION PROCEDURES FOR CHECKING CONTROLS LOOSENESS (Continued) 11-6.3 54. Working  from  forward  left  work  platform, remove strap  (10)  from  bellcrank  (11)  and  tube  (12). Remove  block  (8). 55. Remove  strap  (15)  from  bellcrank (16) and  bolt (17).   Remove  block  (13). 56. Remove  pin  (1) from  support  (2). FOLLOW-ON MAINTENANCE: Connecting  forward  and  aft servocylinder  connecting links  (Task  11-193). Remove  servocylinder  safety  blocks  (T31)  (Task 11-29). Perform  operational  check  of  flight  control  system (TM  55-1520-240-T). Close  forward  and  aft  work  platforms (Task 2-2). Install left  and  right landing  lights  (Task 9-79). Install forward  transmission  drip  pan  (Task 2-3). Install  closet backup  panel  (Task 2-2). Install closet acoustic  blanket (Task  2-108). Install pilot’s and  copilot’s floor panels  (Task 2-82). Perform  operational  check  of  landing  lights  (TM 55-1520-240-T). END  OF  TASK 11-35