TM  55-1520-240-23-9 11-6.3 ISOLATION PROCEDURES FOR CHECKING CONTROLS LOOSENESS (Continued) 11-6.3 CHECK  CLOSET,  TRANSFER  AND  COCKPIT CONNECTING  LINKS NOTE There  is no  overall  looseness  check of  the  cockpit  controls.   The  controls feel  loose  when  there  is no  hydraulic pressure  applied.   Each  connecting link  must  be  checked. 46. Working  from  passageway,  check  ten  connecting links  (52  thru  61) for loose  swaged  inserts (Tasks 11-7  and  11-7.1) and  loose  rod  end  (Task  11-9). 47. Remove  pilot’s  and  copilot’s  floor panels (Task 2-81). 48. Working  in  cockpit,  check six  connecting  links (62  thru  67)  and  four links (68) for loose  swaged inserts (Tasks  11-7  and  11-7.1) and  loose  rod end  bearings  (Tasks  11-9). 49. Remove  left  and  right  landing  lights (Task  9-69). 11-33