TM  55-1520-240-23-9 11-6.2 CHECK  CONTROLS FOR OVERALL LOOSENESS (Continued) 11-6.2 11. Working  from  aft  right  work  platform,  attach  scale (1)  to  bolt  (9)  of  aft  right  bellcrank  (10). 12. Have  helper  pull  scale  (1)  down  until  scale indicates  10 pounds.   Measure  distance  ‘E’ between  bolt  (9)  and  surface  (11)  at  WL  90.75. 13. Have  helper  pull  scale  (1)  up  until  scale  indicates 10 pounds.  Measure  distance  ‘F’  between  bolt (9)  and  surface  (11). 14. Subtract  distance  ‘E’  from  distance  ‘F’.   Result shall  be  less  than  0.375 inch.  If  more,  perform Tasks  11-7,  11-7.1,  and  11-9,  then  11-6.3. 15. Remove  scale  (1)  from  bolt  (9). 16. Working  from  aft  left  work  platform,  repeat  steps 11  thru  15  at  bolt  (12)  of  aft  left  bellcrank  (13). INSPECT FOLLOW-ON  MAINTENANCE: Connect  forward  and  aft  servocylinder  connecting links  (Task  11-193). Remove  servocylinder  safety  blocks  (T31)  (Task 11-29). Perform  operational  check  of  flight  control  system (TM  55-1520-240-T). Close  forward  and  aft  work  platforms  (Task  2-2). END  OF  TASK 11-24