TM  55-1520-240-23-9 11-3 LUBRICATE  FLIGHT CONTROL SYSTEM  ROD END (ANTIFRICTION) (Continued) 11-3 NOTE The  above  procedure  removes  some dirty  grease  from  the  bearing  cavity and  tends to  maximize  the  amount  of grease  left  inside.  The  purpose  of  this type  of re-lubrication  is  to  maintain internal  corrosion  protection  as  much as  to  sustain  low  friction. i. Using  a  clean  cloth, wipe  the  excess  grease off the  bearing  rod  end. j. Turn  on  the  electrical  and  hydraulic power. FOLLOW-ON  MAINTNENACE: None END  OF  TASK 11-10