TM  55-1520-240-23-8 10-15.1 REPAIR  FUEL CELL INTERIOR  PLIES (Continued) 10-15.1 p. Carefully  apply  a  uniform  coat  of  repair cement  (10)  over  patched  area  to  within  no more  than  1/8  inch  of  O.D.  of  buffed  edge. Smooth  surface  with  gloved  fingers  wet  with MEK  (E244).   Use  a  brush.   Remove  any excess  cement  with  cloths  (E120)  dampened with  MEK  (E244).  Wear  gloves  (E184.1). Do  not  flex  fuel  cell  in  repair  area. q. Allow  finished  repair  to  set  for  1  hour  before moving  fuel  cell. r. Allow  finished  repair  to  air  cure  for  24 hours before  use. INSPECT FOLLOW-ON  MAINTENANCE: Visually  inspect  repair  for  workmanship,  no  loose edges,  no  voids,  cement  fully  cured. END  OF  TASK 10-64