TM  55-1520-240-23-8 10-15.1 REPAIR  FUEL CELL INTERIOR  PLIES (Continued) 10-15.1 e. Prepare  repair cement  (E63.2)  by blending the  two  ingredients  of  part  two  (E63.5) together  first  and  then  transfer the  entire contents  of  part two  into  the  can  of  part one (E63.4).   Wear gloves (E186). Unmixed  cement  will  not  cure. f. Stir  cement mixture  with  tongue  depressor (E424)  for  approximately 5  minutes.  Make certain  components are  completely blended together. g. Fill  cavity  of  damaged  area  (1)  level  with inner liner with  cement  mixture  (4)  to  make  a smooth  continuous  surface  to  apply  barrier over.   Smooth  surface  with  gloved  fingers wet  with  MEK  (E244).  Remove  any  excess cement from  unbuffed  area  using  a  clean cloth  dampened  with  MEK  (E244).   Apply cement mixture  to  no  more  than  1/4 inch  of O.D.  of  buffed  area  (5). h. Allow cement  to  air cure  for  approximately 30  minutes. Barrier cement  (E63.3) is  soluble in  methyl-ethyl-ketone  (E244).   Do not  apply  MEK  to  repair area  after applying  barrier cement. Do  not shake  barrier  cement (E63.3). Stir  with  a  wooden  tongue  depressor (E424). 10-62