TM  55-1520-240-23-8 10-15.1 REPAIR  FUEL  CELL  INTERIOR PLIES (Continued) 10-15.1 b. Buff surface  around  damage  (1) 2-1/4 inches larger  in  all  directions  than  damaged  area. Use  portable  drill; abrasive  arbor (2),  and/or scotch-brite  (E2).  Buff  only to  remove  gloss without  excessively  reducing  outer coating thickness. c. Clean  buffed  area.   Use  clean  cloths  (E120) dampened  with  MEK  (E244).  Wear  gloves (E184.1). d. Cut  fabric  reinforcing  patch  (3) from  nylon fabric  (E170.1)  large  enough  to  overlap damaged  area  (1) 2  inches  in  all  directions. 10-61