TM  55-1520-240-23-8 10-15 REPAIR  FUEL  CELL INNER  LINER (Continued) 10-15 Unmixed  cement  will  not  cure. e. Stir  cement mixture  with  tongue  depressor (E424)  for  approximately 5  minutes.  Make certain  components are  completely blended together. f. Apply  a  light coat of cement  mixture  (3) over buffed  repair area  to  no  more  than  1/4 inch of  O.D.  of  buffed  area  (4).   Use  a  brush. Smooth  surface  with  gloved  fingers  wet with MEK (E244) and  remove  any  excess  cement from  unbuffed  area.  Use  clean  cloth  (E120) dampened  with  MEK  (E244).   Wear  gloves (E184.1).  Allow to  air cure  for  approximately 30  minutes. Barrier cement  (E63.3) is  soluble in  methyl-ethyl-ketone  (E244).   Do not  apply  MEK  to  repair area  after applying  barrier cement. Do  not shake  barrier  cement (E63.3). Stir  with  a  wooden  tongue  depressor (E424). Keep  lid  on  can  of  barrier  cement (E63.3)  when  not in  use  to  prevent evaporation  and  thickening. 10-58