TM  55-1520-240-23-8 10-12 REPAIR  FUEL CELL EXTERIOR PLIES (Continued) 10-12 b. Buff surface  around  damage  2-1/4 inches larger in  all  directions than damaged area  (1). Use  portable  drill  (2), abrasive  arbor, and/or Scotch-brite  (E2).  Buff  only  to  remove  gloss without  excessively reducing  outer coating thickness. c. Clean  buffed  area.   Use  clean  cloths  (E120) dampened  with  MEK  (E244).   Wear  gloves (E184.1). d. Cut fabric  reinforcing  patch  (3) from  nylon fabric  (E170.1)  large  enough  to  overlap damaged  area  (1) 2 inches  in  all directions. 10-54