TM  55-1520-240-23-8 10-8 CLEANING  OF FUEL CELL 10-8 INITIAL  SETUP Applicable Configurations: All Tools: Aircraft  Mechanic’s Tool  Kit, NSN 5180-00-323-4692 Materials: Cloths  (E135) Vinegar  (E436) Barrier  Material  (E80) Tape  (E388) Personnel  Required: Medium  Helicopter Repairer Inspector Equipment  Condition: As  Required Do  not  puncture  or  scratch  lining of  fuel  tank.   If lining  is broken,  fuel penetrates  and  activates self-sealing layers.  Activated  layers swell and  trap fuel.  Activated  green  spongy material also  contaminates  fuel  system.   This makes  it  necessary to  replace  fuel tank and  flush  fuel  system. 1. Wash  contaminated  area  of  tank.   Use  cloths (E135)  wet  with  a  50-50  solution  of  water  and vinegar (E436). 2. Wipe  cleaned  area  dry.  Use  cloths  (E135). 3. Make  sure  interior of cell  is  free  of lint and  other foreign  material. INSPECT 4. Cover all holes  in  cell.  Use  barrier material  (E80) and  tape  (E388)  as  necessary. FOLLOW-ON MAINTENANCE: None END  OF  TASK 10-47