TM  55-1520-240-23-8 10-7 REMOVE  MAIN  FUEL TANK  CELL (Continued) 10-7 NOTE Procedure  is same  to remove cell  from No.   1  or  No.  2  fuel  tank.  Removal  of No.   1  (left) cell  is  shown  here. REMOVE  TWO BOOST PUMP  BRACKETS NOTE Procedure  is  same  to  remove  forward and  aft boost  pump  mounting  bracket. Removal  of  forward  mounting  bracket is  shown  here. 1. Remove  four  bolts  (1)  and  washers (2). 2. Remove  pump  bracket  (3).   Remove  flange assembly (4) on  aft  pump  bracket. NOTE Four  different types of  main  fuel  cells are  used  on  the  helicopter.   Each is  interchangeable  and  there  may be  washers  or  bushings  installed between  pump  bracket  and  cell. 3. Remove  four washers  (5)  or  bushings  (6)  as necessary. 4. Remove  four  bolts  (8)  and  washers (9). 5. Remove  packing  (10) between  fuel pod  (11) and fuel  cell  (12). 10-44