TM  55-1520-240-23-8 10-7 REMOVE  MAIN  FUEL TANK CELL 10-7 INITIAL  SETUP Applicable Configurations: All Tools: Aircraft  Mechanic’s Tool  Kit, NSN  5180-00-323-4692 Materials: None Personnel  Required: Medium  Helicopter  Repairer Equipment  Condition: Main  Fuel Tank Removed  (Task  10-6) Main  Fuel  Tank  Forward  Boost  Pump  and  Check Valve  Removed  (Task 10-51) Main  Fuel  Tank  Aft  Boost  Pump  and  Check  Valve Removed  (Task  10-53) Main  Tank Fuel  Lines  and  Electrical  Wiring  Removed (Task  10-41) Main  Fuel Tank Vent Assembly Removed (Task 10-43) Fuel  Level  Control  Valve  and  Mounting  Bracket Removed  (Task  10-59) Tank  Drain  Valves  Removed  (Task  10-39) General Safety Instructions: All  regulations  and  instructions for  handling  fuel  shall  be  strictly observed. Do  not  puncture  or  scratch  lining of  fuel  cell.   If  lining  is  broken,  fuel penetrates  and  activates self  sealing layers.  Activated  layers swell and  trap fuel.  Activated  green  spongy material also  contaminates  fuel  system.   This makes  it necessary to  replace  fuel cell and  flush  fuel  system. 10-43