TM  55-1520-240-23-8 10-6 REMOVE  MAIN  FUEL TANK (Continued) 10-6 6. Disconnect electrical  connector (11). 6.1. Disconnect  hook  (11.1)  from  the  lanyard  on electrical  connector  (11). Do  not  allow  elbow  or  fittings  to turn  when  disconnecting  fuel  hoses from  fittings  on  aft  access  panel. Otherwise,  access door fittings  can fail  and  cause  fuel  blockage. 7. Hold  fitting (12) with  wrench  and  disconnect hose (13).  Catch  spilled  fuel.  Use  grounded  container. Remove  conical  seal  (13.1).  Plug  hose  and  cap fitting. 8. Hold  fitting (14) with  wrench  and  disconnect hose (15).   Plug  hose  and  cap  fitting. 9. Hold  tee  (16)  with  wrench  and  disconnect hose (17).   Remove  conical  seal  (17.1).   Plug  hose and  cap  tee. 10. Remove  four nuts  (18),  washers  (19)  and  bolts (20). 11. Slide  elbow  (21) aft  into  adapter  (22).  Remove gasket  (23). 12. Remove  four nuts  (24), washers  (25),  and  bolts (26). 13. Remove  elbow  (21),  tee  (16), and  gasket (27). 14. Cover holes in  flanges (28  and  29).  Use  barrier material  (E80)  and  tape  (E388). 10-41