TM  55-1520-240-23-8 10-6 REMOVE  MAIN  FUEL TANK (Continued) 10-6 NOTE Procedure  is  same  to  remove  main fuel  tank in  No.  1  or No.  2 fuel system. Removal  of  No.  1  (left) tank  is shown here. LOWER MAIN FUEL TANK  ON  HINGES 1. Disconnect  electrical  connector (1). 1.1. Disconnect  hook  (1.1) from lanyard  on  electrical connector  (1). When  disconnecting  fuel hoses  from access door,  do  not  allow  fittings  to turn.  Otherwise,  access door fittings can  fall  and  cause  fuel blockage. 2. Hold  filling  (2) with  wrench  and  disconnect  hose (3).   Catch  spilled  fuel.  Use  grounded  container. Plug  hose  and  cap  filling. 3. Remove  eight nuts (4),  washers (5) and  bolts  (6). Remove  hose  clamp  (3.1) from the  lower flange. 4. Slide  manifold  (7)  forward  into  adapter  (8). 5. Remove  gaskets  (9  and  10). 10-40