| |
TM 55-1520-240-23-7
8-16.1
INSTALL ENGINE OIL PRESSURE TRANSMITTER AND VIBRATION ISOLATOR MOUNT
8-16.1
INITIAL SETUP
Applicable Configurations:
With 44
Tools:
Engine and Powerplant Repairer’s Tool Kit, NSN
5180-00-323-4944
Materials:
Lockwire (E227)
Petrolatum (E274)
Parts:
Preformed Packing
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
NOTE
Procedure is same for No. 1 and No.
2 engine oil pressure transmitters. No.
2 transmitter is shown here.
Transmitter has three ports at forward
end: P, V, and capped port (zero
adjust).
Arrow on dampener shall point toward
transmitter.
1.
Lubricate dampener (1) and packing (2). Use
petrolatum (E274). Install dampener and packing
in P port (3) of transmitter (4).
2.
Install screw (5), lockwasher (6), and washer (7)
in any hole of mounting flange (8).
8-50
|
