TM  55-1520-240-23-7 8-16 INSTALL  ENGINE  OIL PRESSURE  TRANSMITTER 8-16 INITIAL  SETUP Applicable  Configurations: Without   44    and   74 Tools: Engine  and  Powerplant  Repairer’s  Tool  Kit,  NSN 5180-00-323-4944 Materials: Lockwire  (E231) Petrolatum  (E274) Parts: Preformed  Packing Personnel  Required: Medium  Helicopter Repairer Inspector References: TM  55-1520-240-23P NOTE Procedure  is  same  for No.  1  and  No. 2  engine  oil  pressure  transmitters except  as  noted.  No.  2  transmitter  is shown  here. 1. For  No.   1  installation,  position  transmitter (1) in bracket (2).   Make  sure  connector keyway  (3) is inboard. 2. For  No.   2  installation,  position  transmitter (1) in bracket (2).   Make  sure  connector keyway  (3) is up. 3. Install  four screws (4)  and  washers  (5). 4. Lockwire  screws  (4)  together.   Use  lockwire (E231). 8-48