TM  55-1520-240-23-7 8-15.2 REPLACE  ENGINE  OIL  PRESSURE  TRANSMITTER  VIBRATION  ISOLATOR CLAMPS (Continued) 8-15.2 NOTE Procedure  is  same  for  No.   1  and No.  2  isolator  mount  clamps.  No.  2 clamps are  shown  here. 1. Position  helper inside  aft  fuselage. 2. Remove  eight  bolts  (1) from  outside  and  eight collars  (2)  from  inside. 3. Remove  two  clamps  (3). 4. Position  serviceable  clamp  (3) on  structure  with clamp  opening  outboard. 5. Install  four bolts (1) from  outside  and  four collars (2)  from  inside. 6. Repeat steps  4  and  5  for other  clamp  (3). INSPECT FOLLOW-ON MAINTENANCE: Install  oil  pressure  transmitter  and  vibration  isolator mount  (Task  8-16.1). END  OF  TASK 8-47