TM  55-1520-240-23-7 8-15 REMOVE  ENGINE  OIL PRESSURE  TRANSMITTER 8-15 INITIAL  SETUP Applicable Configurations: Without    74 Tools: Engine  and  Powerplant  Repairer’s  Tool  Kit,  NSN 5180-00-323-4944 Materials: Cloths  (E120) Personnel  Required: Medium  Helicopter Repairer Equipment  Condition: Battery Disconnected  (Task  1-39) Electrical  Power Off Engine  Access  Door Open  (Task 4-49) Engine  Work  Platform  Open  (Task  2-2) NOTE Procedure  is  same  for No.  1  and  No. 2  engine  oil pressure transmitters.  No. 2  transmitter is  shown  here. 1. Remove  lockwire  and  disconnect cable  plug  (1). 2. Disconnect oil  hose  (2). 3. Remove  dampener (3) and  packing  (4). 4. Wipe  up  oil  with  cloths  (E120). 5. Remove  lockwire  and  remove  four  screws  (5) and  washers  (6). 6. Remove  transmitter  (7). FOLLOW-ON MAINTENANCE: None END  OF  TASK 8-43