TM  55-1520-240-23-7 8-2 TEST POWER TURBINE  INLET TEMPERATURE  (PTIT) INDICATOR (Continued) 8-2 OPEN  THERMOCOUPLE  TEST 20. Adjust tester  (2) to  900ºC.  Check indicator  (1). Indicator  shall  read  890ºC to 910ºC.  Record indicator  reading. 21. Disconnect tester  (2) chromel  lead  (4).   Check indicator  (1).  Pointer  of  indicator shall fall  to  full down  scale  stop. 22. Reconnect  tester  (2) chromel  lead  (4).   Check indicator  (1).   Indicator  shall  indicate  reading recorded  in  step  20. 23. Repeat  steps  21  and  22,  disconnect  tester Alumel  lead  (5). 24. Turn  off power to  test  setup. 25. Disconnect indicator (1)  from  test setup. FOLLOW-ON MAINTENANCE: None END  OF  TASK 8-19