TM  55-1520-240-23-7 8-2 TEST POWER TURBINE  INLET TEMPERATURE  (PTIT) INDICATOR (Continued) 8-2 SCALE  ERROR  TEST 7. Adjust tester  (2)  to  ºC.  Test  Point settings listed. Indicator  (1)  readings  shall  be  within  tolerance as  follows:   (Tap  indicator  before  recording readings.) NO  BREAK  -  WORK  HARDER TEST POINT ºC INDICATOR READING RANGE  ºC 200 160  to  240 300 260  to  340 400 370  to  430 500 470  to  530 600 580  to  620 700 690  to  710 800 795  to  805 900 890  to  910 1000 980  to  1020 1100 1070  to 1130 1200 1160  to 1240 SWITCH POINT SETTING 8. Adjust tester  (2)  to  0ºC  setting. 9. Slowly  adjust tester  (2)  up  until  lamp  (3)  comes on. 10. Tap  indicator  (1)  and  record  reading.   Reading shall  be  890ºC  to 910ºC. 8-17