TM  55-1520-240-23-6 7-9 PREPARE  FLIGHT CONTROL HYDRAULIC  SYSTEM  FOR  FLUSHING  (PRESSURE LINES) (Continued) 7-9 NO.  1 AND  NO. 2  LOWER CONTROLS  MODULES NOTE Procedure  is  same  at both  No.  1  and No.  2  lower controls module  locations. No.  2  module  location  shown. 6. Connect  pressure  in  line  (17)  to  pressure  out line  (18)  with  test  hose  (19),  tee  fitting  (20) and fittings  (21). 7. Connect  tee  fitting  (20) to  AFCS  pressure  line (22) with  test  hose  (23) and  fittings  (24). 8. Repeat steps  6  and  7  at  No.  1  module  location. LOWER  CONTROLS  ACTUATORS 9. Connect  AFCS  1  pressure  line  (25) to  AFCS  2 pressure  line  (26) with  test  hose  (27) and  fittings (28). 10. Connect  No.   1  pressure  line  (29)  to  No.   2 pressure  line  (30) with  test  hose  (31) and  fittings (32). 7-61