TM  55-1520-240-23-5 6-20 ALIGN FORWARD  DRIVE  SHAFTING (Continued) 6-20 NOTE Do  not change  position  of  combining transmission  output  shaft  or No.   6 drive  shaft.  If  positions  are  changed, rotary-wing  blades will  be  put out  of phase. 1. Install  adapter  assembly  (1)  on  combining transmission  forward  output  shaft  (2). 2. Position  No.  7 drive  shaft (3) between  No.  6  drive shaft (4) and  adapter assembly (1).  Temporarily install shaft  with  one  bolt  (5).  washer (6), special washer (7) and  nut  (8) at  each  end. 6-61