TM  55-1520-240-23-5 6-17 INSTALL  NO.  1  DRIVE  SHAFT (Continued) 6-17 3. With  aid  of helper, position  shaft  (1)  in  structure (10)  against  forward  transmission  adapter  (11). Install  two  mount  bushings  (6)  in  brackets (12). 4. Coat thread  of three  bolts  (13)  with  oil  (E254). Install  bolts, head  forward, special washers  (14), washers  (15),  and  nuts  (16)  at  forward  end  of shaft  (1). Do  not  allow  bolts  to  turn  when torquing  nuts.  If bolts  turn, bolts  and plates can  be  damaged. NOTE If nuts  do  not  meet friction  torque, they  must  be  replaced. 5. Hold  head  of  bolts  (13)  with  wrench.   Check nuts  (16)  for  friction  torque  of  at  least  24 inch-pounds. 6. Torque  nuts  to  1000 to 1100 inch-pounds. 6-52