TM  55-1520-240-23-5 6-12 DISASSEMBLE  DRIVE  SHAFT (Continued) 6-12 3. Remove  six  nuts  (7),  and  washers  (8)  from bearing  retainer  (9).  Remove  retainer. 4. Remove  bearing  support  (4)  from  adapter assembly  (3). Do  not put  pressure  on  inner  race  of bearing  to  remove  bearing.  Damage to  bearing  can  occur. 5. Remove  two  nuts  (10),  six  washers  (11)  and two  bolts  (12)  from  mount (13)  on  each  side  of bearing  support  (4).  Remove  mounts. 6. Remove  bearing  (14)  from  bearing  support (4).   If  bearing  does  not  remove  easily,  heat support  to  175ºF (80ºC). Use  heat  lamp.  Monitor temperature  with  temperature  indicating  strips (E413). FOLLOW  ON  MAINTENANCE: None END  OF  TASK 6-40