TM  55-1520-240-23-5 6-2 REMOVE  NO.  1  DRIVE  SHAFT (Continued) 6-2 Rotor  blades  will  turn  when  shaft rotates.   Turning  blades  can  injure personnel.  Keep  clear  of  blades as they  turn. NOTE Remove  bolt from  mount at each  side of  adapter  assembly  in  same  way. Right  side  shown  here. 2. Rotate  shaft (4)  to  align  one  of  the  bolt  holes  in adapter  assembly (6)  with  mount  bushing  (7). 3. Support  shaft  (4)  with  cloths  (E120)  or  barrier material  (E80)  (8). 4. Remove  nut  (9),  washers  (10), and  bushing  bolt (11).   Remove  bolt through  bolt  hole  in  adapter assembly (6).  Use  socket  and  extension. 5. Remove  three  bolts (3)  and  special washers  (12) from  shaft  (4)  and  forward  transmission  adapter assembly  (6). 6-13