TM  55-1520-240-23-5 6-2 REMOVE  NO.  1  DRIVE  SHAFT 6-2 INITIAL  SETUP Applicable  Configurations: All Tools: Aircraft  Mechanic’s  Tool  Kit,  NSN  5180-00-323-4692 Materials: Barrier  Material  (E80) Cloths  (E120) Personnel  Required: Medium  Helicopter  Repairer  (2) Equipment  Condition: Battery  Disconnected  (Task  1-39) Electrical  Power  Off Forward  Transmission  Drip  Pan  Removed  (Task  2-3) Forward  Transmission  Aft  Fairing  Removed  (Task 2-63) Forward  Transmission  Oil  Cooler  Air  Inlet  Duct Removed  (Task  6-121) No.  2  Drive  Shaft  Removed  (Task  6-3) Do  not  allow  bolts  to  turn,  if  bolts  turn, bolts  and  plates  can  be  damaged. 1. Remove  nuts  (1)  and  washers  (2)  from  three bolts  (3)  at  forward  end  of  shaft  (4).   During removal,  hold  head  of  bolts  with  a  wrench.   Do not  remove  bolts  at  this  time. 6-12