TM  55-1520-240-23-4 5-9 INSTALL  ROTARY-WING HEAD (Continued) 5-9 Torque  must  be  applied  to  hub  nut  as described.  Wrong  torque  can  result  in loss of helicopter  and  loss  of life. Do  not use  power  tools to  turn  torque applicator.   Applicator  could  be severely  damaged. NOTE Gage  on  torque  applicator  (T2)  is direct  reading  and  shows  actual torque  applied to nut.  Allowable torque range  for  tang  washer  alignment  is 5500  to 6000  foot-pounds.   No  nut stabilization  of any  amount  of  time  is required. 21. Have  helper  turn  handle  (T161)  (32)  clockwise. Observe  gage  (33)  on  torque  applicator  (T2) (31).   Turn  handle  until  gage  indicates  5500 foot-pounds.   Apply  torque  slowly  as  gage reading  approaches 5500  foot-pounds. 5-64