TM  55-1520-240-23-4 5-9 INSTALL  ROTARY-WING HEAD (Continued) 5-9 18. When  nut  (23) is  fully seated,  install socket (T29) (24)  on  nut (23).  Turn  nut  clockwise  hand-tight. NOTE Speed  handle  may  be  used  to  tighten nut until torque  begins  to  increase. NOTE For forward  head, install  adapter with marking  FWD ROTOR  THIS  SIDE  UP on  top.  For aft  head, install  adapter with  marking  AFT  ROTOR THIS SIDE UP  on  top. 19. Install  reaction  adapter (T28)  (25) as follows: a. Secure  three  reaction  hooks  (26) to  adapter (T28) (25)  with  INSTALLATION side  out.  Use bolts  (27). b. Position  adapter  (T28)  (25)  on  top  of  hub (10),  with  reaction  hooks  (26)  against  caps (28) and  with  handwheels  (29) on  top. Do  not  overtighten  handwheels; otherwise,  damage  to  rotor  hub  or adapter can  occur. c. Position  three  clamps  (30) under top  flange (30.1) of  hub  (10).  Tighten  handwheels (29). 5-62