TM  55-1520-240-23-4 5-9 INSTALL  ROTARY-WING HEAD (Continued) 5-9 Move  head  slowly  when  positioning head  on  shaft.   Misalignment  can damage  head  or  shaft.  Use  care  to avoid  pitch  links. 9. Have  helper  position  head  (16)  over drive  shaft (1).  Align  master spline  (19) of head  with  master spline  (20)  of shaft. 10. Lower head  (16) onto  shaft (1)  until  hub  (10)  is seated.   Remove  excess  grease  from  top  and bottom  of  hub.  Use  cloths  (E120). 11. Remove  lifting  device  (T30)  (9) as  follows: a. Loosen  three  nuts  (13) and  remove  three pins  (12). b. Turn  three  arms  (11)  outward. c. Remove  lifting  device  (T30)  (9). 11.1. Remove  ropes  (15). 5-60