TM  55-1520-240-23-4 5-9 INSTALL ROTARY-WING HEAD (Continued) 5-9 PREPARE  HEAD 4. Remove  plate  (5),  washer  (6),  and  locknut  (7) from  handling  adapter  (T13) (8). 4.1. Prepare  lifting  device  (T30)  (9)  for installation (Task  5-8,  step  17). 5. Install  lifting  device  (T30)  (9)  on  hub  (10)  as follows: a. Position  lifting  device  (9) on  hub  (10). b. Turn  three  arms  (11) inward  under  top  flange (11.1)  of  hub  (10).   Make  sure  each  arm points to  the  center  of  device  (9) within  20º. Make  sure  each  arm  engages flange  at least 1/4  inch. c. Install  three  pins  (12). Do  not  use  wrench  to  tighten  nuts. Lifting  device  (T30) can  be  damaged. d. Hand-tighten  three  nuts  (13). 5-57