TM  55-1520-240-23-4 5-8 REMOVE  ROTARY-WING HEAD (Continued) 5-8 10. Install  torque  applicator (T2) (38) and  tee  handle (T161) (39) on  reaction  adapter (T28)  (32).  Turn handle,  if required, to  rotate  applicator  to  engage reaction  pins (39.1) in  adapter. Do  not use  power tools to  turn  torque applicator.   Applicator  could  be severely  damaged. NOTE Pins  under  torque  applicator must  be fully  seated  in  reaction  adapter (T28) to  prevent  applicator ride-up  when torque  is  first  applied. 11. Turn  handle  (39) counterclockwise  until nut  (31) is  loose. 12. Continue  to  loosen  nut  (31)  until  torque  drops to  near  0 foot-pounds.   Use  speed  handle  if available. 13. Try  to  rock  applicator  (T2) (38).   If  applicator rocks,  go  to  step  14.   If  applicator  cannot  be moved, continue  to  turn  handle  (39) until  torque forces are  relieved.   Remove  handle. 5-49