TM  55-1520-240-23-4 5-8 REMOVE  ROTARY-WING HEAD (Continued) 5-8 REMOVE  RETAINING NUT 8. Position  socket  (T29)  (30)  on  hub  retaining  nut (31). NOTE For forward  head, install  adapter with marking  FWD ROTOR  THIS  SIDE  UP on  top.  For aft  head, install  adapter with  marking  AFT  ROTOR THIS SIDE UP  on  top. 9. Install  reaction  adapter (T28)  (32) as follows: a. Secure  three  reaction  hooks  (33) to  adapter (T28)  (32),  with  REMOVAL  side  out.   Use bolts  (34). b. Position  adapter (T28) (32) on  top  of head  (1) with  reaction  hooks  (33) against caps  (35) and  with  handwheels (36) on  top. Do  not  overtighten  handwheels; otherwise,  damage  to  rotor head  or adapter can  occur. c. Position  three  clamps  (37) under top  flange (37.1) of  head  (1).  Tighten  handwheels (36). 5-48