TM  55-1520-240-23-4 5-8 REMOVE  ROTARY-WING HEAD (Continued) 5-8 NOTE Procedure  is  similar  to  remove rotary-wing  head  with  or  without blades  attached.   Removal  of rotary-wing  head  with  blades removed is  shown. Task  is  similar for  forward  and  aft rotary-wing  heads.  Differences  are noted  in  text.  With  blades  off,  forward rotary-wing  head  can  be  removed with  forward  transmission  package installed  in  workstand. PREPARE  HEAD  WITHOUT   50 1. If  head  (1)  will  be  replaced,  remove  one  sliding bushing  (2) from  each  lower  lug  (3). PREPARE  HEAD  WITH   50 1.1. If  head  (1)  will  be  replaced,  do  not  remove bushings  (2  and  2.1) from  each  lower  lug  (3). Bushings are  part  of  rotor head. 2. Disconnect  three  pitch  links  (4)  from  pitch housings  (5) as  follows: a. Remove  cotter pin  (6). b. Remove  nut  (7),  washer (8),  and  bolt (9). c. Disconnect  pitch  link  (4). d. Install  bolt  (9),  washer  (8),  and  nut  (7) in housing  (5). 5-45