TM  55-1520-240-23-4 5-7 REPAIR  ROTARY-WING HEADS (Continued) 5-7 NOTE Procedure  is  similar to  repair forward or  aft  rotary-wing  head.  Differences are  noted  in  text. Damage  limits  and  refinishing  differ for each  area  of  rotary-wing  head. 1. Repair rotary-wing  head  (1) as follows: a. Blend  repair  scores, nicks,  or  gouges so  no sign  of  damage  remains.  Rework  no  deeper than  damage. b. Use  only  crocus cloth  (E122)  applied  with finger  pressure. c. Blend  with  smooth  radius at least 10 times as  wide  as  depth  of  damage. d. Refinish  reworked  areas as soon  as possible. 2. Follow  damage  limits and  refinishing  procedures for  specific  areas  of  rotary-wing  head  (1)  as described: a. Damage  to  top  hub  face  (2) and  bottom  hub face  (3) shall not  exceed  0.005 inch  in  depth by 2.5 inches  in  length  or 0.010 inch  in  depth by 1.0 inch  in  length.  Refinish  (Task  2-348). 5-40