TM  55-1520-240-23-4 5-6.1 INSPECT  ROTARY-WING  HEAD  OIL  TANKS  FOR  ALLOWABLE  OIL LEAKAGE (Continued) 5-6.1 VERTICAL HINGE  PIN OIL  TANKS 17. Service  vertical  hinge  pin  oil  tanks  (8)  (Task 1-57). 18. Connect  battery  (Task  1-39). 19. Have  pilot  perform  a  30  minute  ground  run  (TM 55-1520-240-10). 20. Disconnect  battery (Task  1-39). 21. Install  tiedown  line  (2)  on  one  aft blade  (3)  (Task 1-26). NOTE Tank  must  be  horizontal  to  get  a correct  reading  of  oil  level. 22 Using  tiedown  line  (3),  turn  rotor  blades  (2)  so that oil tank (8)  to  be  checked  is horizontal. 23. Check  oil  level in  sight  gage  (9)  on  each  side  of oil  tank  (8).   If average  level  at  two  gages  is  at bottom  of  sight  gage,  leakage  is  excessive. 24. If leakage  is excessive, vertical hinge  pin  oil tank seals are  defective.   Replace  seals (Task  5-32 thru  Task  5-35). FOLLOW-ON  MAINTENANCE: Close  forward  transmission  fairing  work  platforms (Task  2-2). Close  aft pylon  work  platforms (Task  2-2). Remove  tiedown  line  from  blade  (Task  1-26). END  OF  TASK 5-38