TM  55-1520-240-23-4 5-6 INSPECT  ROTARY-WING HEADS (Continued) 5-6 m. Damage  to  lugs  (23) and  outboard  housing areas  (24) shall  not exceed  0.030  inch  in depth.   There  is  no  restriction  on  damage area.   Rework  within  this  depth  does  not require  shotpeening. n. Damage  to  housing  areas  (25  and  26)  shall not exceed  0.005 inch  in  depth  by 2.5 inches in  length. 3. Check  outboard  hub  areas  (27)  for  scores. Scores  shall  not  be  greater than  0.005  inch by 2.5 inches or 0.010 inch by 1.0  inch.   Scores in  outboard  hub  areas  shall  run  parallel  to  caps (13) within  10º. 4. Check  outboard  side  of  lugs  (23)  for  scores. Scores  shall  not  exceed  0.005 inch  in  depth  by 1.0 inch in  length.   Scores  in  outboard  side  of lugs  shall  run  parallel  to  tanks (22)  within  10º. FOLLOW-ON MAINTENANCE: Close  work  platform  (Task  2-2). END  OF  TASK 5-35