TM  55-1520-240-23-4 5-5 PRESSURE  TEST ROTARY-WING HEAD SEALS  AND PACKINGS (Continued) 5-5 5. Loosen  pressurizing  fitting  (5)  just  enough  to bleed  pressure.   When  gage  pressure  reads  0 psi,  remove  fitting  and  packing  (4). 6. Install  packing  (4) and  plug  (3).  Torque  plug  to 85 inch-pounds.  Lockwire  plug.   Use  lockwire (E231). INSPECT TEST  PITCH-VARYING HOUSING OIL SEALS  AND PACKINGS 7. Check  oil  level  in  sight indicator (10).  Service  oil tank (11) if  needed  (Task  1-57). 8. Remove  filler plug  (12) and  packing  (13).   Install pressurizing  fitting  (14) and  packing  in  tank  (11). Connect  test  setup  (6) to  pressurizing  fitting. 5-28