TM  55-1520-240-23-4 5-4 PLACE  ROTARY-WING  HEAD  IN  SERVICE (Continued) 5-4 6. Install  plate  (8),  washer (9), and  locknut (10) on handling  adapter (T13) (7). 7. Clean  outside  parts of head  (2) and  inner bearing races  (11  and  12).   Use  cloth  (E120) damp  with solvent (E162).  Wear gloves  (E186). 8. Clean  three  pins  (13)  and  six  nuts  (14).   Use cloth  (E120)  damp  with  solvent  (E162).   Wear gloves  (E186). 9. Install  three  pins  (13) in  lugs  (15  and  16).  Install six  nuts  (14) on  pins and  hand-tighten. 10. Check  that head  (2) is  level. 11. Check  oil  level  in  any  of  three  indicators  (17) on  tank  (18).   If  oil  level  is  not  up  to  center  of indicator,  service  tank  (Task 1-55). 12. Check  that  three  plugs  (19) and  three  indicators (17) are  lockwired. 5-23