TM  55-1520-240-23-4 5-3 REMOVE ROTARY-WING  HEAD FROM  SHIPPING  CONTAINER (Continued) 5-3 15. Install  three  pins (15)  in  lugs (43  and  44).  Install six nuts (14)  on  pins  and  hand-tighten. 16. Install  packing  (21), cover  (20), and  retainer  (19). 17. Install  nine  screws  (17)  and  washers  (18). 18. Install  cushion  (29),  clamp  plate  (28),  washer (27), and  nut (26)  on  stud  (45).  Hand-tighten  nut. 19. Install  three  cushions  (25)  and  clamp  angles (24),  on  studs  (46).  Install  six  washers (23)  and nuts (22).   Hand-tighten  nuts. 20. Position  cover  (2)  on  container  (3).  Secure  with 24  washers (9),  bolts  (8),  lockwashers  (7),  and nuts (6).  Hand-tighten  nuts. FOLLOW-ON  MAINTENANCE: None END  OF  TASK 5-20