TM  55-1520-240-23-4 5-2 PREPARE ROTARY-WING  HEADS  FOR SHIPMENT OR STORAGE (Continued) 5-2 Head  can  be  easily  damaged.   Move head  slowly  and  carefully to  prevent it  from  hitting  container. 20. Position  head  (1) in  container  (T73) (26).   Use lifting  device  (T30)  (16)  and  hoist  (19).   Have helper guide  head. 21. Remove  three  pins  (17).  Turn  three  SUPPORT arms  (18) outward.  Remove  lifting  device  (16). 22. Install  cushion  (30),  plate  (29),  washer (28),  and nut  (27). 23. Install  three  cushions  (34)  and  clamp  angles (33).  Secure  with  six washers (32) and  nuts (31). Tighten  nuts just  enough  to  compress cushions. 24. Wrap  each  of three  pins (9)  with  foam  (E181) (37). NOTE Pack only  one  pin  in  each  box. 25. Pack  three  pins (9)  in  three  boxes  (E82) (38). Seal  boxes with  tape.  Tape  two  nuts  (10) on  top of each  box.   Use  tape  (E395). 26. Position  three  boxes (38) in  container  (T73) (26). Secure  boxes with  straps  (39). 5-12