TM  55-1520-240-23-4 5-2 PREPARE ROTARY-WING  HEADS  FOR SHIPMENT OR STORAGE (Continued) 5-2 6. Clean  three  vertical  hinge  pins  (9)  and  six  nuts (10).  Use  cloth  (E120)  damp  with  solvent (E162). Wear  gloves  (E186). 7. Apply thin coat of corrosion-preventive compound (E153)  to  pins  (9)  and  nuts  (10).   Wear  gloves (E186). Wrap  each  pin  and  each  nut separately to  prevent  scratching  of pins. 8. Wrap  three  pins  (9)  and  six  nuts  (10)  in  barrier material  (E80). 9. Clean outside  parts of head  (1) and  inner  bearing races  (11  and  12).  Use  cloth  (E120)  damp  with solvent  (E162).  Wear  gloves  (E186). 10. Apply  coat  of  corrosion-preventive  compound (E162) to  races (11  and 12).  Wear  gloves (E186). 11. Remove  nut (13), washer  (14), and  plate  (15). 12. Install  lifting  device  (T30)  (16)  on  head  (1)  as follows: a. Remove  three  pins  (17)  and  turn  support arms  (18)  outward. b. Position  lifting  device  (16)  on  head  (1). c. Turn  arms (18)  inward  under  head  (1).  Install pins  (17). 5-10