TM  55-1520-240-23-4 5-2 PREPARE  ROTARY-WING HEADS FOR  SHIPMENT OR STORAGE 5-2 INITIAL  SETUP Applicable  Configurations: All Tools: Aircraft Mechanic’s  Tool  Kit,  NSN  5180-00-323-4692 Rotor Head  Lifting  Device  (T30) Rotary-Wing  Head  Shipping  Container (T73) Hoist Low  Pressure  Air  Supply Materials: Lubricating  Oil  (E254) Solvent  (E162) Cloths  (E120) Corrosion-Preventive  Compound  (E153) Desiccant  (E160) (Six  16  Unit Bags) Barrier  Material  (E80) Foam  (E181) Tape  (E395) Boxes  (E82) Gloves  (E186) Personnel  Required: Medium  Helicopter Repairer (2) Equipment  Condition: Rotary-Wing  Head  Mounted  on  Handling  Adapter (T13)  (Task  5-3) Vertical  Hinge  Pin  and  Nuts  Removed  from  Head (Task  5-64) General Safety Instructions: Solvent   (E162)  and corrosion-preventive  compound (E153) are  flammable  and  toxic.  They can  irritate  skin  and  cause  burns. Use  only  in  well-ventilated  area,  away from  heat  and  open  flame.   In  case of  contact,  immediately  flush  skin or  eyes  with  water  for at  least  15 minutes.   Get medical  attention  for eyes. Be  careful  when  releasing  air under pressure;  wear  goggles.   Personal injury can  result. 5-8