TM  55-1520-240-23-4 5-1 ROTARY-WING HEAD  AND  CONTROLS (Continued) 5-1 SWASHPLATES The  forward  and  aft  swashplates  transmit  manual  or automatic cockpit control  movements to  the  rotary-wing blades.   The  swashplates  can  be  tilted  and  moved vertically.   This movement  is  transferred  to  the  blades through  the  pitch  links  and  pitch-varying  housings. Forward  and  aft  swashplates  have  aluminum  rotating rings.  The  stationary ring  on  the  aft  swashplate  is steel. On  the  forward  swashplate  this  ring  is  aluminum.   The stationary  ring  of  each  swashplate  is  mounted  on  a spherical  bearing.   This  allows  the  swashplate  to  tilt in  any direction.  A  ball  bearing  connects rotating  and stationary  rings.  The  swashplate  is  free  to  slide  up  or down  on  a  slider shaft to  change  blade  pitch  angle.  Lugs are  provided  on  the  rotating  ring  for  connecting  three pitch  links and  an  upper drive  arm.   Drive  arm  lugs  are located  in  two  positions so  the  rotating  ring  can  be  used on  forward  or  aft  swashplate.   Lugs  on  the  stationary ring  provide  for connection  of  two  servocylinders, fixed link,  and  longitudinal  cyclic trim  actuator.   Two  single interrupters and  a  double  interruptor on  the  rotating  ring, and  a  magnetic  pickup  on  the  stationary ring, are  used for  rotor  balancing. PITCH  LINKS The  six  pitch  links  are  connected  between  the swashplates  and  pitch-varying  housings.   Tilting  a swashplate  up  or down  moves  the  pitch  link  and  pitch arm  in  the  same  direction.  This increases  or  decreases the blade pitch  angle.  Raising  or lowering the  swashplate on  the  slider shaft  changes pitch  on  all  three  blades. 5-4